- 31 -
© 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS926P User’s Manual
3.3.5.8 EAN-13 Beginning with 977 Add-On Code
Required
This setting programs the engine to require an add-on code (2-digit or 5-digit)
on EAN-13 barcodes that begin with “977”. The following settings can be
programmed:
Require Add-On Code
: All EAN-13 barcodes that begin with “977” must have
a 2-digit or 5-digit add-on code. The EAN-13 barcode
with the add-on code is then transmitted. If the
required add-on code is not found, the EAN-13
barcode is discarded.
Do Not Require Add-On Code
: If you have selected Require Add-On Code,
and you want to disable this feature, scan Do
Not Require Add-On Code. EAN-13 barcodes
are handled, depending on your selection for
the “Add-On Code Required” feature.
Do Not Require Add-On Code *
Require Add-On Code
