The H.T. Hackney Co.
Scanner Programming Guides
Revised: 06/23/2015
O:\hthackney\DOCUMENTATION\Scanner Guidelines.docx
Page
4
of
6
Programming - Symbol LS2208 (USB wired)
1.
Set all Defaults.
2.
Enable the MSI bar code.
3.
Expand UPC-E bar code to UPC-A bar code
4.
Erase any rules in place for the scanner.
5.
Pair/Connect the scanner with your device (name is ‘Wireless Scanner’).
Unitech MS910 - Blue Tooth Connection
Special Instruction
To turn on the scanner, press the button until you hear a single beep or until you see the scanner working.
Before connecting to device (pairing), be sure that the LED light is blinking green. If not then be sure that it has been
turned on and is not paired with any other device.
If scanning is paused for too long, the scanner may turn off to save battery life. Turn it on and wait for one minute
before using the scanner so that it has a chance to reset itself.
Apple Device
1.
Click ‘Settings’ icon
2.
Select ‘Bluetooth’ and Turn On
3.
Turn on the wireless scanner
4.
Select ‘Wireless Scanner’ from list (it may take a couple of minutes to appear in list)
5.
Scanner will be moved to ‘My Devices’ and will say ‘Connected’. Try this step again if not successful
