Unitech MS842P, User Manual

Page: 70 / 104

56
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Interleaved 2 of 5
Enable/Disable Interleaved 2 of 5
To enable or disable Interleaved 2 of 5, scan the appropriate bar code below, and
select an Interleaved 2 of 5 length.
Set Lengths for Interleaved 2 of 5
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for I 2 of 5 to
any length, one or two discrete lengths, or lengths within a specific range. The
range for Interleaved 2 of 5 lengths is 0 - 55.
One Discrete Length - Select this option to decode only I 2 of 5 symbols
containing a selected length. Select the length using the numeric bar codes in
the Appendix of
Numeric Bar Codes . For example, to decode only I 2 of 5
symbols with 14 characters, scan
I 2 of 5 – One Discrete Length
, then scan
1
followed by 4 . To correct an error or to change the selection, scan the Cancel
bar code in Appendix B.
Two Discrete Lengths - Select this option to decode only I 2 of 5 symbols
containing either of two selected lengths. Select lengths using the numeric bar
codes in the Appendix of
Numeric Bar Codes
. For example, to decode only I 2
of 5 symbols containing either 2 or 14 characters, select
I 2 of 5 – Two
Discrete Lengths , then scan 0 , 2 , 1 , and then 4 . To correct an error or to
change the selection, scan the Cancel bar code in Appendix B.
Length Within Range
- Select this option to decode an I 2 of 5 symbol with a
specific length range. Select lengths using numeric bar codes in the Appendix
of
Numeric Bar Codes
. For example, to decode I 2 of 5 symbols containing
between 4 and 12 characters, first scan I 2 of 5 - Length Within Range . Then
scan
0
,
4
,
1,
and
2
(enter a leading zero for single digit numbers). To correct an
error or change the selection, scan the Cancel bar code in Appendix B.
Any Length
- Scan this option to decode I 2 of 5 symbols containing any
number of characters within the decoder’s capability.