Unitech MS842HP User Manual Download Page 61

Page: 61 / 101

Bookland EAN

Enable/Disable Bookland EAN

To enable or disable Bookland EAN, scan the appropriate bar code below.

Note:

If Bookland EAN is enabled, select a

Bookland ISBN Format

. Also select either Decode

UPC/EAN Supplementals, Autodiscriminate UPC/EAN Supplementals, or Enable 978/979
Supplemental Mode in

Decode UPC/EAN/JAN Supplementals

Bookland ISBN Format

If Bookland EAN is enabled, select one of the following formats for Bookland data:

Bookland ISBN-10

- The decoder reports Bookland data starting with 978 in

traditional 10-digit format with the special Bookland check digit for
backward-compatibility. Data starting with 979 is not considered Bookland in this
mode.

Bookland ISBN-13

- The decoder reports Bookland data (starting with either

978 or 979) as EAN-13 in 13-digit format to meet the 2007 ISBN-13 protocol.

Decode UPC/EAN/JAN Supplementals

Summary of Contents for MS842HP

































































































Search results

Summary of Contents for MS842HP

Reviews:

Brands by name

Popular brands

Unitech MS842HP, User Manual

Search results

Summary of Contents for MS842HP

Reviews:

Brands by name

Popular brands