Unitech MS836, User Manual, Page: 12 / 139

Reread Same Barcode with No Delay: The scanner is
allowed to reread same barcode, ignoring the
Reread Same Barcode with a Delay: The scanner is
not allowed to reread same barcode before the reread
delay expires.
To disable rereads of same barcode, enable the
Reread Same Barcode with a Delay and set the delay
to 0.
W100A00
*Reread Same Barcode
with No Delay
W100A10
Reread Same Barcode
with a Delay
Example: Set the reread delay to 5s
1. Scan the Enter Setup barcode.
2. Scan the Reread Delay barcode.
3. Scan the num eric barcodes “5” and “0”.
(See the Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel
Barcodes section in Appendix)
5. Scan the Exit Setup barcode.