Unitech HT650, User Manual

Page: 23 / 41

3.1.3. Charging the battery pack with Single
Dock
a) Do not leave the battery pack inside of the Handy Terminal
1. Connect the Power cord to the Power adapter
2. Connect the power cord to a power source
3. Plug in the connector of the power adapter with Single Dock
4. Insert the Handy Terminal into the Single Dock
b) Place the spare battery pack into the Single Cradle’s spare Battery
charging slot
1. Connect the Power cord to the Power adapter
2. Connect the power cord to a power source
3. Plug in the connector of the power adapter with Single Cradle
4. Insert the Battery pack into the Single Cradle’s spare Battery slot
Caution
：
When charging the battery pack, the Power LED on the Handy
Terminal turns to
Red . After the battery pack is fully charged,
the Power LED turns to Blue .
Caution
：
Please don’t remove the Battery pack too long from Handy
Terminal after you have already full-charged the Battery pack
and backup battery pack and start to use the Handy Terminal.
Otherwise the data stored inside SDRAM memory will be lost.
Please also keep in mind power the Handy Terminal off if you
want to change the main Battery pack.
19