Unitech Part Number: 400412
6
1.2.3. AUTORUN
AUTORUN
is defined to automatically run pre-define
FORMCACHING or APG580
program after power
on. Or setup HT580L to back to previous running point before power off. There are below 4 options for
choice.
Formcaching
Always run Formcaching from beginning after power on
HT580L
APG580
Always run APG580(EasyJob) from beginning after power on
HT580L
RESUME
Back to previous running point before power off. This option
is default setting.
OFF
Always warm-start after power on. It will back to start menu.
1.2.4. Memory
To display total memory and free memory space.
1.3. MODEM
Unitech provide modem cradle as HT580L’s accessory. So, user can get data through modem if
HT580L is plug into modem cradle.
In general, system administrator need to setup host PC to automatically dial to modem cradle and then
issue command from host to do data communication or remote control. For such configuration, it is
necessary to setup modem to automatically pick phone when host call modem. So, it provides option
“
AUTO ANSWER
” to setup modem from HT580L.
User can also directly call to remote host PC from modem cradle via HT580L. So, it is necessary to
setup remote PC’s phone number, and then dial out, and then hang up phone if user need to stop
modem communication.
There are below 4 options on MODEM
1.PHONE NUMBER
To setup remote modem’s phone number
2.AUTO ANSWER
Send ATS0=1 [enter] to modem cradle. So, modem cradle
will automatically pickup phone after one ring tone. You
will get error message if HT580L is not plugged into cradle
or modem cradle is power off.
3.DIAL OUT
Dial out according “Phone number” setting. It will send
“ATDT” + phone number
4.HANG OUT
Hang up phone (send “+++” and then “ATH”)