MENU area
Browse mode
Setting mode
Picture Mode
Normal
Picture Mode
Normal
Brightness
50
Contrast
50
Brightness
50
Contrast
50
Color
50
Color
50
↖
OK key, press the knob, can switch the two modes
↗
Using Menu
Unitech Dcdi 550 adopted a high brightness & contrast LCD screen to display the
entire menu system, if the user does not have operation or operation timeout, the
LCD screen will show the default state. Operate the menu system by using the
knob and keys. The user can check and set its function and states convenient and
intuitive to meet the demands.
The following will combine the keys function and the LCD screen display,
detailed introduces you to Unitech Dcdi 550 of menu system.
How to use the keys
The front panel keys of Unitech Dcdi 550 are divided into four areas: MENU,
CONTROL, INPUTS, and TRANSITION. Besides them, there is special
numeric area including all the buttons of INPUTS and TRANSITION area.
This area contains a knob which can be pressed, a confirmation key (OK) , and a
return key (
). Press the "knob", its function is same as the confirmation
key; long press the "knob", can make the menu system return to the default state
immediately; when to press return key, the menu system may be back to the
higher level menu in turn until returning to the default state.
In the main menu, OK key is also used in the switching between the two modes
below:
10
