9. Failure and methods of elimination
Phenomena
Possible causes
Methods of Elimination
Press start button,
Machine have
a buzzer voic of 3 seconds,
power indicting lamp become
yellow.
◆
Paper too thick.
◆
Paper too hard.
★
Reduce the number of the paper
to
the ruled range.
Papers can be placed in the
right position.
◆
Wastepaper in the
fringe of paper.
★
clear off the wast paper.
Strip can not be riveted
completely.
◆
Circuit protection
control is too early.
★
Jiggle adjust the protecting bolt
in the left sde at the back of
machine withershins.
Riveting point become
Beehive shape or adhensive
to knife.
◆
Circuit protection
control is too late.
★
Jiggle adjust the protecting bolt
in the left side at the back of
machine deasil.
Strip be not severed
◆
Strip has not been
pressed by the bar
◆
Strip is placed in a
wrong position
★
Pull the pressing-bar out from the
base, then press the strip,palce
the strip as per the correct
method renewedly
★
文件使用
"pdfFactory Pro"
试用版本创建
