EP- 45F
Paper Folder Operation Manual
5.
SPEED
10
CLEAR/RESET
SELECT
STORE
TYPE
100
1000
RUN
START/STOP
JAM
TEST
1
NONE
1
7
8
9
11
12 13
5 6
2
4
15
3
10
14
4. Designation and Functions of Control Panel
No.
Designation/Indication
Function
1
Speed adjustment key
Used for adjusting the speed.
2
Store key
Select Memory 1/2 stored folding position and the folding position
after adjustment is stored.
3
Memory 1/2 lamp
Two special folding types are stored.
4
Select key
Used for selecting paper length, the feed position of table A and B,
indicating of the counter when the lights are off.
5
Paper length input mode lamp
It is on when paper length is input; If non-standard-size paper,
press CLEAR/RESET, input correct paper length.
6
Table A stopper move mode lamp It lights when the position of stopper of Table A can be adjusted.
7
Table B stopper move mode lamp It lights when the position of stopper of Table B can be adjusted.
8
+/
–
key
Used for adjusting the position of the stopper of Table A and B,
9
Fold type key
Six folding types & six types of paper can be selected and stored.
10 Numerical key1
Used for inputting the reduced number for subtraction counting and
the length of non- standard-size paper
11
Counter
Shows the number of sheets, the position of the stopper pin of
Table A and B, and paper size.
12 Clear/Reset key
Clears counter indication and resets error. When the Paper length
lamp is on, press this key, can input non-standard-size paper
length
13 Test key
Test fold one sheet (stopper of Table A and B move to the position)
14 Start/Stop key
Starts and stops the machine
15 Statues lamp
It lights when paper stock runs short, or indicates the location when
paper feed trouble occurs.
Summary of Contents for EP-45F
Page 1: ......