21
English
TIME
g
1
) NETWORK TIME (Auto-synchronized clock)
The clock on the main unit is synchronized to the
Internet network time automatically and is adjusted
for optimal accuracy.
Note:
• If your PC is not connected to the Internet for a
long period of time, the clock display may not be
accurate.
• You may set the time offset (+/– 0.5, 1, 1.5 or 2
hours) of your home city in the PC program to
adjust DST & time zone if necessary and the time
on your main unit will be updated accordingly.
Hold [CLOCK]
3
on the main unit to set the 12/24
hour format, press [
s
]
5
or [
t
]
6
to select and
press [CLOCK] to confirm. The “M” & “D” icons will
flash, press [
s
]
5
or [
t
]
6
to select day/month or
month/day format for the calendar. Press [CLOCK]
3
to confirm and exit.
g
2
) SUNRISE / SUNSET TIME
To view the sunrise and sunset time of your home
city, press [CLOCK]
3
button repeatedly until the
respective “SUNRISE” or “SUNSET” icon appears.
g
3
) ALARM TIME
Press [ALARM]
4
button to view the alarm time
and “AL“ icon will appear. Press [ALARM]
4
again to
enable & disable the alarm. “ ” icon appears when
alarm is enable. Press [CLOCK]
3
to return to time
display.
Hold [ALARM]
4
for 3 seconds to enter alarm set-
ting mode. Press [
s
]
5
or [
t
]
6
to enter the desi-
red Hr/ Min values and press [ALARM]
4
to confirm
setting. When alarm is going off, press [ALARM]
4
to stop alarm for one day. Press [MODE/SNOOZE/
LIGHT]
1
to activate snooze function
H) MOON PHASE
Moon phase is displayed according to the current
calendar automatically.
I) CALENDAR
Press [CLOCK]
3
repeatedly to show the time with
day-of-the-week or seconds.
Calendar can be displayed in day/month or month/
day format. See section A “NETWORK TIME” for
setting.
DISPLAY BACKLIGHT
Press MODE/SNOOZE/LIGHT
1
for an extended
backlight.
LOW BATTERY INDICATION
Low battery indication is available for the main unit
& USB transmitter. Replace the batteries and follow
the setup procedure in this instruction manual.
Low battery indicator
Main unit:
Below the ”IN”-icon in local section
USB transmitter: Below to the “Last Update” box
Remote sensor: Next to the “CH 1 2 3” icons
Note:
After battery replacement, you are required to set up
the rF connection again.
Main Unit & USB Transmitter: Press [PC Search]
2
on main unit, then press [TRANSMIT]
9
on USb
transmitter.
Main Unit & Remote Sensor: Hold [CH/SEARCH]
7
on main unit, then press [TX]
on remote sensor.
Refer “ESTABLISH RF CONNECTION WITH MAIN
UINIT” section for details.
USB TrANSMITTEr
Press [PC Search]
2
on the main unit and then
press [TRANSMIT]
9
on the USb transmitter to
enforce transmitting rF weather data and set up
the RF connection with the main unit. (See “USB
TRANSMITTER & PROGRAM INSTALLATION”
section to set up the USB transmitter).
Note:
• To run the PC program, ensure that your USB
transmitter is connected properly to the PC via an
USb port.
• When weather data is transmitted from the USB
transmitter, the red LED
will flash.
(G) Network Time or
S Sunset
Time or
Alarm Time
(H) Moon Phase
(I) calendar
313500.00_W194-1_Manual_140807.indd 21
07.08.14 16:57
