UNITEC Climate W185, Owner'S Manual, Page: 9 / 20

9 English
WEATHER FORECAST & BAROMETRIC PRES-
SURE BAR CHART
The unit predicts weather condition of the next 12 –
24 hours based on the change of atmospheric pres-
sure. The coverage area is around 30 – 50 km. The
weather forecast is based on atmospheric pressure
change and is about 70-75% correct. As weather
conditions cannot be 100% correctly forecasted,
we cannot be responsible for any loss caused by an
incorrect forecast.
SUNNY PARTLY CLOUDY
CLOUDY RAINY
STORMY
IN/OUT TEMPERATURE & HUMIDITY
Press [CHANNEL/SNOOZE]
button to select
indoor, Ch1, Ch2, Ch3 and auto-channel scrolling
(G)
display modes. Press [C/F]
button to select
temperature unit C/ F.
To search for remote sensor, hold [CHANNEL/
SNOOZE] on the main unit until a beep is sound.
Then press [TX]
on the remote sensor to transmit
RF signal to the receiver. When RF connection is es-
tablished, the respective temperature
(E)
& humidity
(H)
of the selected channel
(F)
will appear on the
main unit.
IN/OUT HEAT INDEX
Heat Index
(D)
combines the effects of heat and
humidity. It is the apparent temperature of how hot
the heat-humidity combination makes it feels.
Press [
HEAT INDEX/DEW POINT] button once to
show the respective indoor or outdoor heat index.
“HEAT INDEX” icon will appear.
IN/OUT DEW POINT
Dew point is the saturation point of the air, or the
temperature to which the air has to be cooled in
order to get condensation.
In normal mode, press [HEAT INDEX / DEW POINT]
button twice to show the respective indoor or
outdoor dew point reading. “DEW POINT”
(D)
icon
will appear.
COLOR BAR GRAPHS
The color graphs are designed as an intuitive way to
gauge the weather at a glance.
The red color bar graph
(J)
represents the respective
In/Out temperature, heat index or dew point of the
current display mode. The blue graph
(I)
represents
the respective In/Out humidity. As the measure-
ments change, the number of illuminated bars
changes automatically.
MAXIMUM / MINIMUM MEMORY
Press [MEM]
button repeatedly to view the
maximum & minimum values of temperature,
humidity, heat index or dew point readings. To clear
the memory record, hold [MEM]
button while the
respective values are displaying on screen.
CLOCK & CALENDAR
Press [CLOCK]
to toggle display between time,
calendar and day of the week.
Hold [CLOCK]
button to enter clock setting mode.
Using [
s
]
or [
t
]
to adjust and [CLOCK]
to
confirm, the following values can be set in sequence:
12/24hr format > Hr > Min > Yr > D/M or M/D for-
mat > Month > Date > EXIT
313507.00_W185_Manual_140227.indd 9 03.04.14 09:36