Selecting the temperature
1.
Refine modes ironing for clothes that you are going to iron.
2.
Fabrics having any finish (applications, folds, etc.) can be ironed at the lowest temperature.
3.
If the fabric contains several kinds of fibres, select the temperature for the tissue in which the canvas of the
greatest content. For example: if the fabric contains 60% polyester and 40% cotton, you should select the
temperature corresponding to polyester and to iron without steam.
4.
First, you must determine the type of fabric for ironing. Since the sole is heated sufficiently quickly, so
begins to stroke better fabrics requiring a lower ironing temperature, such as woven fabrics of synthetic
fibers. Then, in the process of ironing gradually move to tissues that require a higher temperature ironing.
5.
Turn the temperature regulator by comparing its value with a dash in front of it:
·
position for nylon and rayon
··
position for wool, silk and mixed fabrics
··
·
position for cotton or linen (steaming)
Filling the water tank
1.
Unplug the iron.
2.
Set the mode switch steam to "off".
3.
Fill the tank through the opening for pouring water.
4.
After completion of the work always drain the remaining water from the tank. Do not store the iron with
remaining in the tank water.
Important: If you have hard water, we recommend that you use distilled or demineralized water.
Do not use solvents or perfume water.
Steam ironing
1.
Fill the tank with water as described in "Filling the water tank."
2.
Connect the iron to the electrical grid.
3.
Steam ironing is possible only when the maximum heating temperature of the sole. Otherwise, no
formation of steam and the water can flow through the sole.
4.
Wait until the indicator light turns off, it indicates that there has been a selected temperature.
5.
Set the steam supply to the desired position.
6.
At the end of the work and during breaks in ironing things set the iron in vertical position.
7.
After completing unplug the iron, pour the remaining water in it, and put to cool.
Spray
1.
The spray can be used in any position, either in dry or steam ironing, as long as the water tank is filled
with water.
2.
Press the spray button for this function.
NOTE: This button has to be pressed repetitively to start this function for the first time.
