Unit UOR-993, User Manual, Page: 10 / 24

Oil radiator | UOR-993
10
Timer: Auto power on
Note: This function should only be set if you require the heater to be automatically
turned on after a certain period of time (1 to 24 hours from the time the function is
set). Only make timer power on setting under Stand-by mode.
1. Press the on/off power switch (6) to turn the appliance on. The light on ( )
will turn on. The appliance will be in Stand-by mode.
2. Press the Timer button (d), the light on (H) will turn on, and the start hour
digit (0.0) will blink.
3. Use the “+” and “-” buttons to set the heater operation time between 1 and
24 hours. 0.0 - 5.0 hours increase by 0.5 hour, 5.0 - 24 hours increase by
1 hour. This function will activate once the hour digit stops blinking. The
countdown digits will show on the display.
4. The heater will automatically turn on when the time runs out.
Remark: After the timer power on setting, make the power and ECO mode settings. And under
ECO mode, make the temperature settings. So that the heater will turn on at the desired
temperature or power setting.
Note: When using timer modes, consideration should be given to the fact that the heater may
come on whilst unattended. Always follow the safety instructions provided.
Timer: Auto power off
Note: This function should only be set if you require the heater to be automatically
shut off after a certain period of time (1 to 24 hours from the time the function is set)
1. When heater working, press the Timer button (d), the light on(H) will turn
on, and the start hour digit (0.0) will blink.
2. Use the “+” and “-” buttons to set the heater operation time between 1 and
24 hours. 0.0 - 5.0 hours increase by 0.5 hour, 5.0 - 24 hours increase by
1 hour. This function will activate once the hour digit stops blinking. The
countdown digits will show on the display.
3. The heater will automatically shut off when the time runs out.
Shutdown
Press the stand-by button (f) until sleep mode is selected and the control panel
screen goes off.