Unit UEK-269, Instruction Manual

Page: 8 / 18

CAREAND CLEANING
• Always remove the plug from the socket and allow the appliance to cool.
• Wipe the exterior of the kettle and the Power Base (6) with a damp soft cloth.
• Remove stubborn spots with a cloth moistened (not wet) with sudsy water or mild, non-abrasive cleaner.
• Avoid using scouring pads, harsh detergents, solvents, and polish, abrasive or aerosol cleaners as they may
damage surfaces of the product. Dry with a clean, soft cloth before storage, or reconnecting to the power
outlet.
• Do not immerse the kettle or the Power Base (6) in to the water or any other liquids.
• Use the cord storage, which is located in the Power Base (6) to keep the power cord.
• From time to time, depending on the nature of your water supply, you need to clean the inside of the
kettle.
This can be done in the following manner:
1. Fill the kettle with cold tap water half-full.
2. Add 30 ml of while vinegar to the water in the kettle.
3. Boil the mixture and leave it for 1 or 2 minutes, then re-boil the mixtures and re-boil once more with clean
water.
Note:
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives, hard brushes etc.) to
clean the appliance.
• Never put the kettle or Power Base (6) into the dishwasher.
AUTO SHUT OFF FUNCTION
The feature auto-off is design to protect from overheating, or switching without water. It will operate if the kettle is
switch «ON» when there is insufficient amount of water inside the kettle (the water level in the kettle below the
"MIN" mark). If this should occur, switch the kettle off and remove the power cord from the power outlet. Allow
cooling for 10 minutes then refilling with cold water and reconnecting to the power outlet.
6 | ELECTRIC KETTLE / ЭЛЕКТРИЧЕСКИЙ ЧАЙНИК