7
Sandwich maker-grill (2 in 1) | UDM-3110
ENGLISH
Using the device
During operation the device should always be horizontally.
1. Install the necessary panels into sandwich maker.
2. Connect the appliance to the mains. Both indicators light up and the appli-
ance starts to heat up. When the appliance reaches the right temperature,
ready lamp (green) blinks off. After that you can cook.
3. Prepare the products for sandwiches (if you want sandwiches with a golden
crust, put a small amount of butter on the bread) or for grilled dishes (piec-
es of meat or vegetables, chicken fillets, etc.). Open the cover and place the
ingredients on the underside of the heating surface. Press the food with the
top panel until the cover locking mechanism snaps into place.
If you cook a large number of foods on the grill, do not close the cover. Leave it open at 90 °.
4. After cooking, open the cover and take the finished products with wooden or
silicone kitchen paddles.
Do not use plastic objects which are not resistant to high temperatures to remove
the finished products, as well as metal and sharp objects which can damage the
non-stick coating.
5. If you want to prepare more food, close the cover again and wait for the
ready lamp (green) blinks off. Then repeat the instructions written above.
6. Disconnect the device from the electrical outlet after use.
Prompts
• Do not use the grill to cook meat with bones.
• It is recommended to cook a small amount of food at once.
• Do not cut the food in too thick pieces. Otherwise, the cooking process will
take longer. Also, when preparing pieces thicker than 1 cm, they must be
turned at least once.