Unit UBI-404, Instruction Manual

Page: 6 / 16

6
Blender | UBI-404
ENGLISH
BEFORE FIRST USE
• Unpack the motor unit, the bowl and the lid.
• Remove all packaging materials.
• Wash the glass bowl and cover with warm water (be careful when washing the
inside of the bowl, as the blades are very sharp). Do not immerse the motor
unit in water or any other liquid. Wipe with a damp soft cloth.
• Hold the handle of the cup, set it on the motor unit.
• Turn the bowl clockwise to fix it on the motor unit.
Important: The blender will not turn on if the bowl is installed incorrectly.
Place the lid on top of bowl and press down to seal closed the cup.
Install the filler cap in the lid of the bowl and rotate it counterclockwise until it
stops.
The blender is ready to use.
THE OPERATION OF THE DEVICE
• Make sure the blender is disconnected from the electrical outlet and the
speed control is set to position “ 0 “ to “Off”.
• Vegetables and fruits peel and remove the core. Cut them into pieces no larg-
er than 15 mm.
• Remove the lid and place the food in the bowl.
• Adding water to keep the level of liquid along with slices of vegetables and
fruits does not exceed 1500 ml.
Note: Do not use hot water. Do not operate the blender with an empty cup.
• Tightly close the lid of the bowl.
• Connect the blender to the mains.
• Turn the speed control clockwise to set the desired speed.
• The Use button “P” for pulse or accurate mixing.
• If you want to add the ingredients in the blender during operation, open the
cover flap on the lid of the bowl, add the ingredients and close the lid of the
neck.