FT012TH Wireless Indoor 8-Channel Thermo-Hygrometer
1
Introduction
Thank you for your purchase of the FT012TH Wireless Indoor 8-Channel Thermo-Hygrometer with
Display. The following user guide provides step by step instructions for installation, operation and
troubleshooting.
1.1
Indoor
Thermo
Hygrometer
Sensor
Set
Up
1.
Remove the battery door on the back of the display
。
1.
Insert two AAA (alkaline or
lithium, avoid rechargeable) batteries in the back of the indoor
sensor.
Figure 1
2.
Insert two AAA batteries.
After inserting the batteries, All of the LCD segments will light up for a few seconds to verify all
segments are operating properly. and then
icon flash once per 60 seconds thereafter. Each time it
flashes, the sensor is transmitting data.
3.
Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
the display, as shown in Figure 2.
