Wake-up your e-Guard:
Installation guide:
150 mm
Make sure the door latch cannot be
opened.
When the button is pressed, SLEEP
appears on the display.
To activate the device you have to
press the button 5 times within 5
seconds.
After that the display shows StArt for
a short time. Now the seal is ready
and creates sealing numbers.
1/4”
ø6mm
1/4”
ø6mm
Cut excess with a saw and remove
any sharp edges with a file.
Additional tools
Saw
drill ø6mm or
1/4”
Open-end spanner 10
pen
file
5 SEK
5x
Push the button and write down the
4 digit unique sealing number.
unlock your seal
Push the button on your final desti-
nation and check your code again.
Close the seal
How to use:
8930
8930
