3
IMPORTANT !
After unpacking allow time for the product to reach normal
room temperature before connecting up and switching on. This is
to allow any condensation to dissipate, which might otherwise
cause damage to the electronics.
Remember also that
condensation can form when moving the amplifier from a cold
place to a warm room.
Keep the packaging in a safe place. Any time you need to
transport the amplifier it will be best packed safely in its original
carton.
2. FITTING THE VALVES &
AMPLIFIER PLACEMENT
Remove the protective valve cage as detailed in para. 4
Insert the valves in their respective sockets, taking care that the
orientation and position of each (V1, V2 etc) is correct.
Refit the protective valve cage.
When choosing the best position for your Unison Research
P30K
please bear in mind the following guidelines.
Valves are sensitive to shock and mechanical vibration which in
turn can affect the quality of sound. For this reason avoid placing the
amplifier close to the loudspeakers. Placement on a sturdy and
resonance-free shelf or equipment support will enable the amplifier to
perform at its best. Always remember to allow adequate ventilation
above and around the valves.
3.
CONNECTING
INPUTS
AND
OUTPUTS
IMPORTANT
Ensure that both the preamp and power amp are
switched off before making the following connections !
Using RCA phono interconnects of suitable quality, connect
the outputs from your preamp to the inputs on the rear panel of the
P30K. (Red = Right Channel, Black = Left Channel)
