www.unisem.co.kr | [email protected] | +82.31.724.2548
- Change the settings such as APN and NFC registration and press the reset switch.
3.5 APN and NFC setting method
Input the commands by the PuTTY Program.
1) The device’s wire is opened by NFC generally.
2) The device receives GPS signal and wait until transmitting ‘Open’ event.
3) After ‘Open’ event is sent, the device will be changed to ‘setting mode’.
4) The USB cable(A to Mini-B type) connects to PC.
5) After Serial COM port is recognized, COM port connects to ‘115200’ Speed.
(Checking the COM port can be found in Device Manager on your PC.)
6) After the device closes, the device is working normally again.
Reset Switch