NO SOUND
-
Ensure that the mains adapter is pushed fully into the power outlet and
that its cable is properly connected to the DC IN connector on the
transmitter.
-
Ensure that the Headset Receiver Power ON/OFF switch is switched
to ON.
-
The charge level of Battery inside Headset Receiver may be too low.
Recharge the battery or replace them with fully charged batteries.
-
Ensure that the TV set, Hi-Fi system or audio component is switched
ON and set to a channel that broadcasts an audio signal.
-
Use the Volume Control on the Headset Receiver to increase the
sound level.
-
The connected audio/video equipment may not be in playback mode.
Start playback on by the equipment.
-
The Headset Receiver output level is set too low. Adjust the volume to
a suitable level.
DISTORTION
-
The charge level of Battery inside Headset Receiver may be too low.
Recharge the battery or replace them with fully charged batteries.
-
The Headset Receiver may be too far away from the Transmitter. Move
closer to it.
-
The Audio Signal input level is too low. Increase the volume from the
audio source.
In case the headset receiver cannot be linked with the transmitter. Please
follow the following procedure for Pairing:
1.
Turn
OFF
the power of the Transmitter.
2.
Turn
ON
the Headset Receiver.
3.
Press and Hold the MIC Button for about 5 seconds, the Green LED flash
