UNIS Ultra Moto VR, Operation Manual

Page: 11 / 99

Ultra Moto VR Manual
03/03/2020
10
Leveler
About
0.2 in/
5mm
We do not recommend using power tools as they may cause damage.
NOTICE
Make sure the machine is level.
NOTICE
Leveler
Leveler
Leveler
4. SET UP & INSTALLATION
This product is an indoor game machine. Do not install outdoors.

Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid.

Place the unit on a dry level surface.

Ventilation openings in the back of the unit must not be obstructed by objects or by
wall.
4.1 Transporting the Game
If you need to move the game, adjust the levelers back to an “up” position.
NOTICE

Be careful not to damage the machine during transport.

Always unplug the game before moving.

Keep the machine in upright position during transport.

For longer distance transport, package the game properly to prevent damages.
4.2 Level Adjustment
Install this game on a flat surface. If the game is installed on an unsuitable floor, it could
cause game malfunction.
To secure the game, loosen the nut, utilize wrench to adjust the leveler down until it
touches the floor, lifting the casters off the ground by 0.2 in/5mm. Repeat the same for all
levelers.