Lane Master Manual
01/17/2018
30
Display
Possible Cause
Recommended action
Loose connection of the
send ball assembly.
Check and reconnect the
loose cables of send ball
assembly.
Send ball assembly is
broken.
Check the connection, if the
problem remains unresolved,
please call the service
department for assistance.
No ball found inside the
lane.
Roll a ball to the lane.
Sensor problem.
Change the sensor after
checking the connection.
Wrong PC Number
Set the unique PC Number
for each machine.
Bad connection of the
network port or cable.
Check if the network port is
lighting or replace the
network cable light.
Switch or network problem
Check the power of the
switch or replace the switch.
Make sure the internet
connection is available.
7.2 System Recovery Operation
(NOTE: Do not disconnect power during this process.)
1. Turn off the game. Remove recovery USB from the header. (Note: This process may take
up to 60 minutes) Insert the memory stick into the USB port at the back of the computer.
2. Restart PC to enter the system recovery screen as shown.
3. The game will automatically start recovery.
4. Once system recovery is
partially finished (as shown below), and the ICON appears,
remove the USB flash drive from the computer. The game will continue the install process.
5. Assure that the recovery USB has been properly secured for future use.
WARNING: the USB flash drive should only be used to fix software errors. Using it for
other purposes may cause unexpected results and damages.
