Skill Fantastic Prize 2 GMP Manual
06/15/2023
16
If you see following error signs showing on the display, please try the recommended action.
Display
Possible Cause
Recommended action
E5 Pls Close
Door
The prize door is not been
closed.
Close the prize door
The prize door lock is faulty.
Replace the prize door lock.
E3 Motor Err
The crane do not touch the
Back limited sensor.
Restart the machine.
Connector became loose
during transport.
Check and reconnect the Back limited
sensor and Front&back motor
connector.
Back limited sensor is faulty.
Replace Back limited sensor.
Front and back motor is faulty.
Replace Front and back motor motor.
E4 Cut Err
The scissors are not cut or
continuously cutting during the
game.
Restart the machine.
Connector became loose
during transport.
Check and reconnect the sensor and
motor connector.
Scissors sensor screw loosen
Adjust the scissors sensor screw.
Scissors sensor is faulty.
Replace scissors sensor.
Scissors motor is faulty.
Test the scissors motor.(Refer to 8.4).
If the motor is faulty, replace scissors
motor.
E1 Coin Error
The coin mechanism signal is
faulty.
Turn the NO/NC switch to the NO
position.
The coin mechanism is faulty.
Replace coin mechanism.
E2 No Prize
Hanging
No prize on the cabinet.
Add prize.
The prize is too light
The prize weight should be over 0.5kg.
Hook sensor is faulty.
Replace Hook sensor.
8.2 System Update Operation
Step 1. Power off the game.
Step 2. Insert the TF card with new program into the TF card socket of the mainboard.
Step 3. Power on and the system will automatically start update.
Step 4. Wait for several seconds, remove TF card. Restart the machine.
Step 5. Factory Reset: Enter Program-ParaSet-Factory Reset.
Step 6. Program Update complete!
WARNING: The TF card should only be used to update system. Using it for other
purposes may cause unexpected results and damages.
