UNIS emoji Frenzy D&B, Operation Manual

Page: 27 / 85

Emoji Frenzy D&B Manual
04/06/2023
26
If you see following error signs showing on the display, please try the recommended action.
Display Possible Cause Recommended action
The connection part of the
IO board and PC are loose.
Check and reconnect the
loose ports of the PC or IO
board.
Cable quality problem
Change the cable after
checking the connection
between IO board and PC.
Cable became loose during
transportation.
Check and reconnect the
loose cables of the PC or IO
board.
IO board is faulty.
Reboot the game after
checking connection and
cable problem, if the problem
remains unresolved, please
call the service department
for assistance.
Out of ticket. Refill ticket
Loose connection of the
ticket dispenser’s cables.
Check and reconnect the
loose cables to the ticket
dispenser.
Ticket dispenser is faulty. Change the ticket dispenser.
Ticket jam. Remove jammed tickets.
Out of ticket. Refill ticket
The connection part of the
P1/2/3/4 IO board are
loose.
Check and reconnect the
loose ports of the IO board.
Hopper IO board connector
may be loosen .
Check and reconnect the
loose ports of the Hopper IO
board.
Hopper assembly is not
installed/Not install well.
Install Hopper assembly
well.check all the hopper
connectors.
P1/2/3/4 Channel of the
hopper no balls.
Refill balls on the hopper.
P1/2/3/4 hopper channel
sensor is broken.
Replace hopper channel
sensor.
Ball jam on the P1/2/3/4
hopper channel.
Remove jammed balls.
P1/2/3/4 Channel of the
hopper no balls.
Refill balls on the hopper.