15
XC-142
w w w . u n i q u e m o d e l r c .c o m
T E L :+ 8 6- 7 6 9 – 8 9 0 6 2 2 2 6
非常重要：
Very Important
1
、连接电池，拨动
5
通道开关，将飞机置于固定翼状态，（注意：连接电池后请
保持飞机机身静止状态，不要晃动机身）
Connect to the battery, open channel 5 to make the plane under fixed wing mold.
(Caution: keep the fuselage static after connecting the battery, do not shake the
fuselage. )
2
、断开电池连接
Disconnect the battery.
3
、插上校准线
(
接线图所示，在附件包内
)
Plug to the calibration wire.( shown in wiring diagram, the attachment bags)
4
、再次连接电池
Connect to the battery again.
5
、飞控板上绿色的灯会有节奏闪烁，然后迅速将油门杆和升降杆同时打向
45
度
左下方，飞控上的灯会高频率快速闪动，然后同时松开油门和升降杆，校准完成。
When the green lights on the control panel flashing rhythmically, then quickly lift both
throttle and elevator 45 degrees to the lower left. After the light flash fast, release the
throttle and elevator, then calibration finished.
6
、 断开电池电源
Disconnect the power.
7
、拔掉校准线
Pull out the calibration wire.
8
、再次连接电池
Connect the battery again.
请必须完成以下几条检验，以免给你造成损失
：
Please complete the following a few test, in order to avoid losses to you
1
、检查各通道反正舵面是否正确
方法是：（
1
）左打副翼摇杆，左边副翼舵面上翘为正确
（
2
）右打副翼摇杆，右边副翼舵面上翘为正确
（
3
）下拉升降摇杆，升降舵面上翘为正确
（
4
）上推升降摇杆，升降舵面下翘为正确
1
、
Check each channel if it is correct.
Checking method:
