20
PROTECTING YOUR DISHWASHER FOR LONG PERIODS
TROUBLESHOOTING
To restore service:
1
Reconnect the water, drain, and electrical power.
2
Turn on water and electrical power supply.
3
Fill the detergent cup and the rinse aid cup and run the dishwasher through a
heated-wash cycle.
4
Check all connections to make sure they do not leak.
Refer to this table to correct minor issues before calling for service
Caution
• If an overflow occurs, turn off the main water supply before calling for service.
• If there is water in the base pan because of an overfill or small leak, the water should be
removed before restarting the dishwasher.
Longer inlet time
• Faucet is not opened
• Water intake is restricted
• Water pressure is too low
Overflow
A leak in the dishwasher
The wire is not connected correctly,
or the distributary valve is broken.
Anything (including water)
touching a button.
The orientation of the distributary
valve not working.
A button has been touched for more than
30 seconds (by anything, including water).
Summary of Contents for CLASSIC RETRO UGP-24CR DW T
Page 27: ......
