COPYRIGHT 2016, UNIQUE AUTOMATION
- 4 -
08/11/2016 12:57
Graphics Display
When the bath is empty or BUI is not used for few minutes BUI goes into
hibernation and its graphics display goes blank. To make the system ready for use
you need to touch any function or navigation button and the graphics below will
appear indicating bathomatic status: Current bath water temperature and depth and
the last called / desired water temperature and depth.
bathomatic status:
Filling - when bathomatic is filling
Pause - bathomatic filling/draining is paused
1
Draining / emptying - when bathomatic is draining
“DRAINING”
Empty
– “CHOOSE TEMP & DEPTH”
Ready
– “READY WHEN YOU ARE”
Water Temperature
the temperature of the water in the bath
Water Depth
the depth of the water in the bath
Desired Temperature
the temperature value last sent to bathomatic
Desired Depth
the depth value last sent to bathomatic
1
Pressing the
button during filling or draining will put bathomatic in paused status awaiting further
instructions. Pressing the
button again will change status to filling and
followed by the
button will change status to draining.
