6.FUNCTION SETTING
45
6-2-7. Each code key disablement
F805AT-CK enables to disable Each Code key (Final, Over, Under, ACCUM.CLEAR, TOTAL COMP,
TOTAL LIMIT, COUNT LIMIT) for avoiding false operation on the touch screen.
If this setting is INVALID, writing of set values through RS-232C is also disabled.
Select VALID or INVALID in the Function setting item
1) VALID
Changing of set values of each code is enabled.
2) INVALID
Changing of set values of each code is disabled.
Operation
6-2-8. Accumulation command acceptance
Select to receive the accumulation command regularly (REGULARLY) or to receive it only when the
indicated value is stable (IN STABLE MODE). Select from REGULARLY/ IN STABLE MODE.
1) REGULARLY
The accumulation command is accepted regularly.
2) IN STABLE MODE
The accumulation command is accepted only when the indicated value is
stable (while the STAB lamp is lit).
Operation
6-2-9. Tare display
The tare can be displayed on the main display by keeping TARE pressed with the setting of TARE
KEY ON.
Select from TARE KEY ON/ INHIBIT.
1) TARE KEY ON
The tare is displayed when
is kept pressed.
2) INHIBIT
The tare is not displayed.
Operation
MODE
FUNCTION
PAGE
→
→
Press
EACH CODE KEY
→
→
Select INVALID/ VALID
OK
→
MODE
EXTENDED FUNC.
→
→
Press
ACCUMULATION COMMAND ACCEPTANCE
→
Select REGULARLY/ IN STABLE MODE
OK
→
TARE
MODE
EXTENDED FUNC.
→
→
Press
TARE DISPLAY
→
Select INHIBIT/ TARE KEY ON
OK
→
