Unipulse F805AT-BC, Operation Manual

Page: 74 / 202

6.SETTING AND ADJUSTMENT OF READING
59
6-3-5. Terminator
Use this menu item to select which terminator to use with RS-232C.
Operation
6-3-6. SI/F output1 select
Use this menu item to select the data 1 to send out via SI/F.
Operation
6-3-7. SI/F output2 select
Use this menu item to select the data 2 to send out via SI/F.
Operation
Options: CR, CR+LF
MODE COMMUNICATION TERMINATOR
→ →
PAGE
→
Options: BELT SPEED, WEIGHT DENSITY, FEED RATE, LOAD RATIO,
FEED RATIO, GROSS WEIGHT, TOTAL (UP. 4 DIG. ),
MODE COMMUNICATION SIF OUTPUT1 SELECT → → PAGE →
TOTAL (LO. 5 DIG. )
Options: BELT SPEED, WEIGHT DENSITY, FEED RATE, LOAD RATIO,
FEED RATIO, GROSS WEIGHT, TOTAL (UP. 4 DIG. ),
MODE COMMUNICATION SIF OUTPUT2 SELECT
→ →
PAGE
→
TOTAL (LO. 5 DIG. )