Unipulse F701-P, Operation Manual

Page: 58 / 116

47
7 SYSTEM-RELATED SETTINGS AND OPERATIONS
47
SY
ST
EM
-R
EL
A
TE
D
S
ET
TI
N
G
S
A
N
D
O
PE
R
A
TI
O
N
S
Chapter
7
7-1.
LOCK (soft)
This lock is intended to prevent misoperation. For setting values effective on LOCK (soft), see"11-
1.List of setting values" on page 97.
Select from 0:OFF or 1:ON.
7-2.
Password
For future extension purpose only. Normally, it is not used.
7-3.
Self-check
This device is provided with the self-check function to automatically check the memory and detect
abnormality and the visual-check function by which the display can be checked visually.
Turn on the power while pressing the
key. This immediately starts checking.
* The software version display may differ depending on the time of purchase.
* Visually check the display.
* If there is any abnormality in memory check, checking stops instantly.
* If checking stops in midstream or the display does not show properly, it indicates a failure. Ask us
or your distributor for repair.
Description Type
1 Full lighting on display Display
2 Software version Display
3 Full lighting on display Display
4 Checksum Display
5 ROM checksum check Auto
←
when an error occurs
6 Status display lighting in succession Visual
7 7-segment lighting on display Visual
8 F-RAM read/write check Auto
←
when an error occurs
9 Display of PASS and end of checking Display
7
SYSTEM-RELATED SETTINGS
AND OPERATIONS
LOCK2
0: OFF
1: ON
LOCK1
0: OFF
1: ON
LOCK
4 digits
←