6.FUNCTIONS
66
6-12. Discharging Control Mode
The discharging control means the control method for discharging raw material from the hopper
or tank.
F156 enables to discharge accurate quantity with the proper combination of setting the control
of Final, Set Point 2, Set Point 1, Compensation and Judging Over, Under, Go and Timer for
Comparison Inhibit, Judging.
According to the way of discharging, Feeding, Discharging or Simple comparison control or
Sequence control is selectable.
6-12-1. Feeding Weighing and Discharging Weighing
Feeding Weighing
A method controlling a weight while feeding raw materials into a measuring tank (hopper).
Example of feeding weighing.
In this example system, raw materials are to be fed from the material tank to the weighing tank.
At first, the feeding valves are to be fully opened to feed, and closed in the order of Set Point 1
→
Set Point 2, and Set Point 2
→
Set Point 3 at the time of Final - Set Point 1, and Final - Set
Point 2, respectively. The feeding valves are to be completely closed at the time of Final -
Compensation. The weighed raw materials are to be discharged to a container by opening the
discharge valves.
/CVGTKCNVCPM
9GKIJKPIVCPM
$GNVEQPXG[QT
5GSWGPEGT
%QPVTQNNGT
&KUEJCTIGXCNXGU
5WOOKPI
DQZ
.QCFEGNNU
(GGFKPIXCNXGU
525252
%QPVCKPGT
F156
Summary of Contents for F156
Page 1: ...F156 WEIGHING CONTROLLER 07 JUN 2012 REV 1 40 OPERATION MANUAL CC Link Ver 1 10...
Page 115: ...7 REMOTE CONSOLE UNIT 106 Monitor change Change the display with the key...
Page 120: ...7 REMOTE CONSOLE UNIT 111 Monitor change Change the display with the keys 0 to 9 1 2 3 4 5 0...
Page 155: ...13 DIMENSIONS 146 13 DIMENSIONS...
