4.CALIBRATION
40
4-3-3. Decimal place
Set the decimal place. The decimal place can be selected from 0.000 / 0.00 / 0.0 / 0.
Setting / 3 : 0.000 2 : 0.00 1 : 0.0 0 : 0
CC-Link
0
46
0 to 3
0
MSB
LSB
RWw0006
RWw0005
RWw0004
Write the code No. and set value.
H
L
Code No.
Set value
remote register
Word size
Console
1) Select code 46.
2) Press the ENT key, and then set the
decimal place.
3) Determine the setting with the ENT key.
Decimal place
Not only weight values but also other register addresses of the F156 are not
given the notion of decimal place. For example, to set the capacity at 100.00
and the minimum scale division at 0.01, set 10000 and 1, and then the decimal
place “2: 0.00,” respectively.
Summary of Contents for F156
Page 1: ...F156 WEIGHING CONTROLLER 07 JUN 2012 REV 1 40 OPERATION MANUAL CC Link Ver 1 10...
Page 115: ...7 REMOTE CONSOLE UNIT 106 Monitor change Change the display with the key...
Page 120: ...7 REMOTE CONSOLE UNIT 111 Monitor change Change the display with the keys 0 to 9 1 2 3 4 5 0...
Page 155: ...13 DIMENSIONS 146 13 DIMENSIONS...
