Unipulse F156, Operation Manual

Page: 111 / 160

6.FUNCTIONS
102
6-13-6. Sequence Error
If the sequence start signal is input under conditions that weighing cannot be performed
properly, or if the stop signal is inputted during weighing, a sequence error occurs, and weighing
cannot be started until it is canceled. For details of each error, see "12.ERROR CODES" on
p.144.
Such a sequence error is canceled by the sequence stop signal (external control input or
operational command code 85) or sequence error reset signal (RY001A or operational command
code 86).
※
The RY0019 does not include the sequence error reset function. To inhibit the sequence start
without resetting the sequence error, turn ON the RY0019.
※
When sequence error 3 occurs, the zero alarm also occurs at the same time, but only the
sequence error is canceled. For the method of canceling the zero alarm, see "Digital zero
reset" on p.56.