10 - Nut
11 - Washer
12 - Spacer
13 - Long bolt
14 - Lower post
15 - Upper post
16 - Fibreglass rod
17 - Cap
a)
Arrange the frame of the jumping mat (1) into a circular shape. Connect it
alternately
Connect with "T" connectors (9) by sliding in. Fold until the rails form a
complete circle. Lay the prepared frame on the ground.
b)
Move to the assembly of the bases (3). Connect the base on both sides
Connect the base on both sides with the extension (2), for this purpose slide
the elements over each other.
c)
Join the prepared structures, the circle and the bases together. Insert the frame
ends of the bases into the "T" holes of the frame. Check the stability of the
connections and tighten if necessary.
