9
Q u i c k G u i d e
To be able to operate UniTire, you need to
know how to press the two buttons. UniTire
uses three different presses on each button.
A short press, a longer press, and a very long
press. This manual use small icons to show the
different buttons and presses like this:
Normal short press on the
left
or
right
button.
1
1
longer press on the
left
or
right
but
-
ton. Just a little longer than the normal press.
3
3
longest press on the
left
or
right
but
-
ton. Keep pressing until something happens!
Please be aware, that it is only necessary to
use the normal press (
) and the longest
press (
3
3
). Only secondary features are
operated with the longer press (
1
1
).
TURNING UNITIRE ON
To enable fast and easy operation there are
two different ways to turn UniTire on.
If you just want to see the current pres-
sure, turn UniTire on by pressing the
right
button ( ). If you want to measure each tire
in a guided way and store them for later, turn
UniTire on by pressing the
left
button ( ).
UniTire starts by showing the startup screen for
a few seconds. After that you will be on either
the pressure screen or the pressure sequence
screen. If you want to skip the startup screen
and go directly to the selected pressure mode,
just press the button again. you can also just
press the button a little longer when you turn
UniTire on.
SEEING THE PRESSURE
If you started in “pressure mode”, the screen
will show the current tire pressure. The pres-
sure value is constantly updated to allow for
quick pressure adjustments.
If the
right
button ( ) is pressed, the current
value will be stored in the history list under the
big pressure value. This history list shows the
last three values and it will roll down each time
a new value is stored. This history list is stored
in memory when UniTire is turned off.
If you want to clear the history list, just press
and hold down the
left
button (
3
) until the
list disappear.
The pressure value is shown using the pressure
unit selected in setup. It could be for instance
bar or psi. This is described later in this ma-
nual. The bottom line will show the pressure
unit selected.
This chapter describes how to get started with using the UniTire
just for the basic functions:
Turning UniTire on and off, seeing current tire pressure, storing
the tire pressure for all tires and how to recall them later.
Quick Guide
Summary of Contents for UniTire
Page 1: ...UniTire Pressure Gauge User Guide...
Page 8: ...8 I n t r o d u c t i o n Examples...
Page 22: ...22...
