C O R P O R A T I O N
TPCMQ DC/DC CONVERTER SERIES
OPERATING MANUAL
4
3.3 Options
CODE
DESCRIPTION
Z
I
2
C Serial Data Bus
NOTE:
Add Option Code as suffi x to model no. on both modules and rack/shelf.
Contact factory on availability of Option Z.
4.0
SAFETY WARNINGS
3.1
These converter modules and shelf have hazardous external and
internal voltages. They should be handled, tested and installed only
by qualifi ed technical persons who are trained in the use of power
systems and are well aware of the hazards involved.
4.2
The input terminals are at hazardous voltage potentials. Do not touch this
area when power is applied.
4.3
When operating this converter system, the frame ground terminal must be
connected to safety ground to minimize electrical shock hazard.
4.4
The internal voltages are at hazardous potentials. The converter module
covers should not be removed. There are no user-serviceable components
in these units. Removing the covers of the modules will void the warranty.
5.0
WARRANTY
All products of UNIPOWER Telecom, a division of UNIPOWER Corporation, are warranted for two
(2) years from date of shipment against defects in material and workmanship. This warranty does
not extend to products which have been opened, altered or repaired by persons other than per-
sons authorized by the manufacturer or to products which become defective due to acts of God,
negligence or the failure of customer to fully follow instructions with respect to installation, ap-
plication or maintenance. This warranty is extended directly by the manufacturer to the buyer and
is the sole warranty applicable. EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, THE
MANUFACTURER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. As the sole and exclusive remedy under this warranty, the manufacturer, at its option,
may repair or replace the non-conforming product or issue credit, provided the manufacturer’s
inspection establishes the existence of a defect. To exercise this remedy, the buyer must contact
the manufacturer’s Customer Service Department to obtain a Return Material Authorization num-
ber and shipping instructions. Products returned without prior authorization will be returned
to buyer. All products returned for repair must be shipped freight prepaid to UNIPOWER. If the
buyer fails to fully comply with the foregoing, the buyer agrees that no other remedy (including,
but not limited to, incidental or consequential damages for lost profi ts, lost sales, injury to person
or property or any other incidental or consequential losses) shall be available to the buyer.
