5
3.3 Turn on switch
Please connect the AC power cord into the rear of the switch and to an electrical outlet (preferably one
that is grounded ). When the switch is power on, the LED indicators flash momentarily for one second,
which represents a resetting of the system.The Power LED indicator turns on green.
Note: Please confirm the voltage is correct before power on, otherwise the switch will be damaged.
(The power input is:100V-240Vac, 50/60Hz.)
4
、
Web-based GUI
When you first logon, make sure the following:
1. Switch power supply has been started normaly, any port is connected to the management console.
2. Management console has been correctly installed cable network and the network card driver, and has
set up a correct installation of Internet explorer 6.0 or above and the browser.
3. Management host IP address is set to the same network segment and switch ports, namely 192.168.2.
X (X for any integer between 2 to 254), subnet mask 255.255.255.0.In order to ensure you better
experience of the Web page display effect, it is recommended that you adjust the resolution of the
display to 1024 x 768 pixels or above.Open the IE browser, type http://192.168.2.1 login switches in the
address bar of a Web page.
