Technical and safety information
Models:
Unipi Gate
PLEASE RETAIN THIS DOCUMENT FOR FUTURE REFERENCE
CAUTION
The unit can be powered only by a power source in compliance with the unit’s specifications. Using unsuitable power supply
can result in damage to the unit or connected devices. Unplug all power supplies and voltage sources before any
manipulation with the unit – danger of electrical injury or component damage!
Do not use the controller in potentially explosive atmospheres! The controller can be installed only by trained personnel with
sufficient qualification. The unit can be installed only in a suitable environment following the product’s technical specifications
(indoor space with suitable temperature and humidity, waterproof distribution boxes, etc.).
All connected peripherals should comply with all standards and regulations relevant to the country and the intended use.
Power supply (SELV)
9–30 V
⎓
Working temperature
0 °C ... +55 °C
Installation
DIN rail (35 mm)
Optionally on an electric
distribution box mounting
panel
Working position
Vertical/Horizontal
IP ingress protection
(IEC 529)
IP20
Storage temperature
-25 °C ... +70 °C
Working conditions
Compliance information
Unipi Gate comply with the relevant provisions of the
EMC and RoHS Directive for the European Union.
WEEE Directive Statement for the European Union
As an electrical and electronic product Unipi Gate
cannot be disposed of in a household waste upon
decommissioning. Alternative arrangements may
apply in other jurisdictions.
General information
www.
unipi
.technology
Technical support, Knowledge Base
h ps://kb.
unipi
.technology
