4
CONNECTIONS
All the connections are via the 6pin socket on the underside and are as follows:
Video out – The LCD monitor is plugged into the 6pin connector for viewing/changing
the current settings and the sighting of the camera.
Charge input – With the unit switched off charge the internal battery pack with the
battery charger supplied.
OPERATION
POWERING UP – Press in the alternate latching power button on the underside of the
unit. The unit must have been previously off for it to now power up
providing there is
sufficient battery voltage
. The indicator LED will now illuminate GREEN for
approximately 10 seconds whilst the unit does a self-test and the current settings are
displayed (connect the monitor to view/change if required). The LED state will then
change from continuous GREEN to flashing GREEN every 5 seconds. This indicates the
unit is ready to record as per the settings.
VIEW OF UNDERSIDE
WITH ACCESS COVER REMOVED
SD CARD IN DVR
PUSH TO EJECT
MONITOR &
CHARGE
CONNECTOR
INDICATOR
LED
ON/OFF
POWER
BUTTON
