Edition 23.11.21 |
Product design and technical data may be subject to change
27.4
Ø15.
5
57.
5
105.5
Page
2/4
unios.com
Page
3/4
1
7
5
6
ON
OFF
Dimming
This luminaire can be dimmed. Unios® recommends a
phase-cut dimmer optimised for LED technology. For
non-standard configurations refer to driver data sheet.
For full list of compatible drivers, see unios.com
2
Wiring
Mounting Plate
Driver Compatibility
ASTW0007
Output
Power
Driving
Current
Forward
Voltage
Product Code
7W
500mA
11-13V
All measurements are in millimetres.
See below
AC
Power Source
L
E
DRIVER
LED
N
1
2
3
Strip 7mm
7mm
Heat
Heat until tin melts
4
IP65/66 Installations
To ensure a complete seal around the mounting area, an
exterior grade caulk must be used around the perimeter of
the back of the mounting plate.
Do not
caulk bottom of
mounting plate to ensure sufficient drainage.
3
See details on
page 4