![background image](http://html.mh-extra.com/html/unior/266b-series/266b-series_manual_843201005.webp)
5
TRACK MODE OPERATION
START
Setting target torque
Current torque value
Current torque value
((...((...
...))...)) ((...((... ...))...))
((...((...
...))...)) ((...((... ...))...))
NOTE:
1. If
appears, that means this wrench has been
applied with more than 110% of torque of the spec.
2. When 90% of the target torque is reached, the green
LED will begin to flash and the alarm tone will beep
intermittently.
3. When 99.5% of the target torque has been reached, the
alarm will change to a steady tone and the green LED will
stop flashing and stay on. The red LED will also illuminate.
Apply torque
Buzzer
Buzzer
Green LED
Reach 90% of target torque
Red LED
Approached target torque
Reach 90% of target torque
Reach target torque
C