11
TRACK MODE OPERATION
Buzzer
(((((((( )))))))) ((((((( )))))))
Apply Torque
Current Torque Value
Current Torque Value
*Note 1
START
(System initial)
((…((… …))…)) ((…((… …)) …))
Buzzer
Red LED
Approached Target Torque
Setting Target Torque
Green LED
Reach 80% of Target Torque
Reach Target Torque
Reach 80% of Target Torque
*Note 3
Note:
1.
If
is appeared, that means this wrench has ever
been applied more than 110% of torque of the spec.
2.
When 80% of the target torque is reached, the green LED will
begin to flash and the alarm tone will beep intermittently.
3.
When the target torque is approached, the alarm will change to
a steady tone and the green LED will stop flashing and stay on.
The red LED will also illuminate.
*Note 2
Summary of Contents for 266 Series
Page 1: ...OWNER S MANUAL Electronic Torque Wrench 266 Series ...
Page 17: ...16 ...