Unior 1518, Operating Instruction, Page: 3 / 4

Warranty:
Unior d.d. offers one year free charge service warranty to products
supplied by Unior d.d. and authorized dealers.
All products are warranted under following conditions:
* one year from the date of purchase for tools with Unior brand name.
* the free charge service only applies to defects in material and
workmanship. The guarantee becomes invalid if the tool has been
improperly used or has been repaired using non genuine spare parts
and/or has been modified or repaired by someone other then UNIOR
d.d. authorized service representatives.
Spare parts:
EC Declaration of Conformity
Unior d.d.
Kovaška cesta 10, 3214 Zreče, SLOVENIJA
Declares under its own responsibility that the following product,
Article 1518 - 1/4" Pneumatic angle grinder
is in conformity with essential safety and health requirements of
council Directive 98/37/EEC, and folowing provisions of the
harmonized standards mentioned below: prEN792/ EN 292-1/
EN 292-2/ EN 28662/ DIN 45635-1/ DIN 45635-20 / ISO 8662.
Zreče, December 2006
Gorazd Korošec, President
Name and signature of the authorized person
№ Code Description Qty.
1518.1 618015 Motor Housing 1
1518.2 618016 Seal plate 1
1518.3 618017 Ball Bearing 1
1518.4 618018 Arbor 1
1518.5 618019 Ball bearing 1
1518.6 618020 Woodruff key 1
1518.7 618021 Bevel Gear 1
1518.8 618022 Wave washer 1
1518.9 618023 External Stop ring 1
1518.10 618024 Gasket 1
1518.11 618025 Retainer 1
1518.12 618026 Center Wheel guard 1
1518.13 618027 Spring washer 5
1518.14 618028 Hex socket head cap bolt 5
1518.15 618029 Rotor 1
1518.16 618030 Front end plate 1
1518.17 618031 Cylinder 1
1518.18 618032 Spring pin 1
1518.19 618033 Rotor blade 4
1518.20 618034 Rear end plate 1
1518.21 618035 Governor 1
1518.22 618036 Pendulum 8
1518.23 618037 Spring pin 2
1518.24 618038 Plunger 1
1518.25 618039 Adjust screw 1
1518.26 618040 Spring 1
1518.27 618041 Adjust nut 1
1518.28 618042 Ball bearing 1
1518.29 618043 Bevel pinion 1
1518.30 618044 O-Ring 1
1518.31 618045 Exhaust deflector 1
1518.32 618046 Tapping screw 2
1518.33 618047 Plug 1
1518.34 618048 O-Ring 1
1518.35 618049 Flange 1
1518.36 618050 Grinding wheel 1
1518.37 618051 Flange nut 1
1518.38 618052 Handle 1
1518.39 618053 Wrench (A) 1
1518.40 618054 Wrench (B) 1
1518.41 618055 Ball Bearing 2
1518.42 618056 Throttle valve housing 1
1518.43 618057 Bushing 1
1518.44 618058 Air inlet bushing 1
1518.45 618059 Valve stem 1
1518.46 618060 Valve spring 1
1518.47 618061 Throttle housing 1
1518.48 618062 O-Ring 1
1518.49 618063 O-Ring 1
1518.50 618064 Throttle lever 1
1518.51 618065 Throttle lever lock 1
1518.52 618066 Torsion spring 1
1518.53 618067 Spring pin 1
1518.54 618068 Spring pin 1
1518.55 618069 Lock ring 1
1518.56 618070 Coupling nut 1