3
SAFETY RULES
CAUTION!
THESE SYMBOLS INDICATE THAT YOUR PERSONAL SAFETY IS INVOLVED
This equipment is designed to operate under specified voltage requirements. The electrical power to the
equipment MUST match the voltage specifications for the equipment.
Before operating the machine check the direction of rotation of the handwheel. Breakage may occur if
the direction of rotation is incorrect.
TO PREVENT PERSONAL INJURY:
Only qualified persons should operate the machine.
Wear safety glasses.
All shields and guards MUST be in position before operating machine.
DO NOT tamper with safety shields, guards, etc., while machine is in operation.
The main equipment power switch MUST be turned-off for the following:
•
Threading needle, looper, spreader etc.
•
Replacing sewing parts such as needle, presser foot, throat plate, looper, spreader, feed
dog, needle guard, folder, fabric guard etc.
•
The workstation is unattended or work has been completed for the day.
•
For all maintenance work.
•
When making adjustments to the machine.
DO NOT touch moving machine parts while the machines main power switch is turned-on DAN-
GER OF INJURY COULD OCCUR!
The sewing unit should only be used for its intended purpose. All applicable safe guarding MUST
be considered when making any modifications to the machine.
IMPORTANT!
Any work on the equipment should be done by authorized persons and only with the equipment
power switch turned-off and its plug and air supply disconnected.
The above and all adjustments stated in the adjusting instructions should be adhered to for safe
operation of this equipment.
