Union Instruments INCA4003, Translation Of The Original Operating Instructions

Page: 45 / 65

Operation
8.2.7 Saved measured values
Press the forward or back
key to step through the last saved
measured values.
The measured values are
identified by the count/date/time.
8.2.8 Display in the warmup phase
WARM-UP *
T(IR) : 49.2°C - OK
---
T(POX)
: 0x0400 -
The figure shows the display during the warm-up phase. In the figure, the infrared
electronics, T(IR), have reached operating temperature. Depending on the type of
sensor, this is 49°C or 64°C. The Parox sensor, T(POX), is not ready. Once it
reaches its operating temperature, the display shows T(POX)=0x0000 and OK.
Devices with sensors that do not require a specific operating temperature start
without a warm-up phase and start measuring immediately when switched on.
45