Union Community UBio-X Pro2 User Manual Download Page 86

Page: 86 / 89

UBio-X Pro2 User Guide

UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,

Seoul, Korea (zip code: 05836)

Tel: +82-2-6488-3000, Fax: +82-2-6488-3099,

E-Mail :[email protected]; http://www.unioncomm.co.kr



4.3.2. Fingerprint authentication

▶

1:N Authentication (Identification)

If you put your fingerprint on the fingerprint sensor at the basic window, the

fingerprint is entered with the light on the sensor with beeping. Do not take off your

finger until the light of the sensor turns off completely.

▶

1:1 Authentication (Verification)

As shown in the following figure, enter your ID first by clicking the

[Input ID]

button,

and input your fingerprint when the fingerprint entering window appears and the light

is turned on at the fingerprint sensor.

Do not take off your finger until the light of the sensor turns off completely.

Summary of Contents for UBio-X Pro2

























































































Search results

Summary of Contents for UBio-X Pro2

Reviews:

Related manuals for UBio-X Pro2

Brands by name

Popular brands

Union Community UBio-X Pro2, User Manual

Search results

Summary of Contents for UBio-X Pro2

Reviews:

Related manuals for UBio-X Pro2

Brands by name

Popular brands