UNINEX KoolBase MSC1800NE, User Manual

Page: 7 / 15

Cooling Duct
Filter
Operation Switch
Curved Duct
Condensation Tank (3L)
Caster Wheel
Exhaust
Raised Nub
Notch
Slot
Curved Duct
Cooling Duct
Cooling Duct Base
Releasing-Locking Ring
Cold Air Exit
Lock Unlock
4. PARTS OF THE MACHINE
5. INSTALLATION
• INSTALLING THE CURVED DUCT
Line up the nubs on the curved duct with slot on the cold air exit. Turn locking ring until lt is locked
position.
• INSTALLING THE COOLING DUCT
Slide the cooling duct raised nub in to the slot of the curved duct. Then turn clockwise to lock.
Make sure the duct is connected properly before using. When adjusting the direction, turn the curved
duct instead of the cooling duct.
Cooling Duct Installation Curved Duct Installation
Kool Base
7