In order to improve the products in this catalogue the specifications are subject to change without notice.
MAINTENANCE AND ASSEMBLY INSTRUCTIONS / MCE AND MSCE MINI ELECTRIC CYLINDERS AND SLIDERS
MOUNTING
MOUNTING
MOUNTING OPTIONS
Mounting the product
Mounting accessories are not pre-assembled to the
product in the factory before shipment.
Never use other mounting points as it is presented
The product can be mounted only by the presented points
(see Figure 8 or 10), otherwise the product may be damaged.
Avoid from collision of the mounting screws and the
product
There must never be any collision of the mounting
screws and the product, otherwise the product may be
damaged. The length of the mounting screws must be
selected properly.
For the mounting holes dimensions of the product and
accessories, please refer to the product catalogue MCE
and MSCE (mini electric cylinders and sliders).
For the mounting accessories, please refer to the
product catalogue MCE and MSCE (mini electric
cylinders and sliders).
MCE
The product can be mounted as follows (see Figure 8):
1 –by the cylinder profile
2 – by the front cap
3 –by the piston rod end
4 – by the motor side drive (MSD)
5 – by the guiding unit
6 – by the back mount (accessory)
Figure 8:
Mounting the MCE.
